Headphone amplifier in class A.
The amplifier is assembled according to the Lehmann Audio Black Cube scheme, but unlike the original, the trace of the tracks is reduced by more than 2 times, which can not but positively affect the operation of the device. Several options are available:

Transistors
- Output transistors BD140 / BD139 Philips, vintage in a gray case with copper legs.
- The output transistors BD140 / BD139 (Fairchild Semiconductor) they are in the past "ON", and even earlier "MOTOROLLA"
- Output transistors BD140 / BD139 (ST)
- Driver transistors BC546 / BC556 Philips, vintage with silver "face"
- Driver transistors BC546 / BC556 (Fairchild Semiconductor) they are in the past "ON", and even earlier "MOTOROLLA"
- Driver transistors BC546 / BC556 (China)


Isolation capacitors
- Polypropylene film capacitors WIMA, MKP series
- Polypropylene film capacitors of the CBB21, CBB22 series

Resistors
Metal Film Resistors Vishay DALE
Metal Film Resistors Vishay Beyschlag mbb0207
Metal Film Resistors China

Recommended for use with headphone protection module

The amplifier module is equipped with an op-amp
NE5532 or TL072 to choose from.
For an additional fee can be equipped with:
LME49860
OPA2134
Options are available according to individual agreement.
Power supply voltage 2x13 ... 16V
In the presence of toroidal transformers for powering this amplifier.
Measurements
Supply voltage AC 18V...0...18V
Load resistance

68 Ohm

Maximum power, W 0,5
Testing power, W 0,04
Frequency response (from 40 Hz to 15 kHz), dB +0.06, -0.04
Noise level, dB (A) -103,7
Dynamic range, dB (A) 103,7
THD, % 0,0058
THD + Noise, dB (A) -82,0
IMD + Noise, % 0,0057
Stereo crosstalk, dB -67,0
IMD at 10 kHz, % 0,0059
Measurement Page

Headphone amplifier, A class. Testing, Measuring Characteristics

General characteristics
Amplifier class A
Built-in protection No
Gain 18
Maximum supply voltage (bipolar / constant) DC 20V
Minimum supply voltage (bipolar / constant) DC 17V
Module size LxWxH, mm

50x127x40

Number of channels stereo
Output transistors BD139/BD140
Supply voltage, maximum (alternating / 2 shoulders on) AC 16V
Supply voltage, minimum (alternating / 2 shoulders on) AC 13V
Weight, kg

0,133

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Headphone Amplifier, Class A

  • Brands kitON
  • Product Code: AHB-01
  • Availability: In Stock
  • 1180.00грн.


Available Options


Related Products

Tags: HEADPHONE AMPLIFIER A CLASS

Featured Articles

Measurement technique

Measurement technique

Any more or less complex electronic device requires a functional check and adjustmentThe audio power amplifier is no exception and measurements of the characteristics of this device are not only a dev..

Headphone amplifier, A class Premium, measurements

Headphone amplifier, A class Premium, measurements

Testing device Headphone amplifier, A class Premium Sampling mode 24-bit, 48 kHz Interface E-MU1616m Testing chain E-MU1616m>Headphone amplifier, A class Premi..

Headphone amplifier, A class, measurements

Headphone amplifier, A class, measurements

Testing device Headphone amplifier, A class Sampling mode 24-bit, 48 kHz Interface E-MU1616m Testing chain E-MU1616m>Headphone amplifier, A class>E-MU1616m ..