The controller-board module for charging Li-ion 3.7 V batteries (18650 and similar), creating an external Power Bank battery.
1.1 "LCD with backlight; display% of battery charge, controller status (gives or receives current) and active output (5 V 1 A or 5 V 2.1 A)
Two USB outputs, allowing you to simultaneously power two different devices
Output: 5V to 2A / 5V to 1A
MicroUSB socket for charging installed batteries
Overcharge / Overcharge, Over Current Protection
Built-in LED for use as a flashlight (inclusion by double pressing the button)
Board size: 5.7 x 2.7 cm
It is recommended that you use a controller with at least two 18650 batteries. The current from one bank may not be enough for the correct operation of the controller.
1.1 "LCD with backlight; display% of battery charge, controller status (gives or receives current) and active output (5 V 1 A or 5 V 2.1 A)
Two USB outputs, allowing you to simultaneously power two different devices
Output: 5V to 2A / 5V to 1A
MicroUSB socket for charging installed batteries
Overcharge / Overcharge, Over Current Protection
Built-in LED for use as a flashlight (inclusion by double pressing the button)
Board size: 5.7 x 2.7 cm
It is recommended that you use a controller with at least two 18650 batteries. The current from one bank may not be enough for the correct operation of the controller.
| General characteristics | |
| Built-in protection | From overdischarge From overcharge |
| Charging current up to | 1 А |
| Discharge current up to | 2А+1A |
| Full charge voltage: | 4,2V |
| Full discharge voltage: | 2,7V |
| Input voltage, (constant) DC | 5V |
| Size | 56,5х26mm |
PowerBank module, 2xUSB 5V, 2A, LCD
- Brands CHINA
- Product Code: CHPB2U02-01
- Availability: In Stock
-
410.00грн.