The development of modern silicon technology has given a second life to class D amplifiers. The circuitry of these amplifiers provides a significantly higher damping coefficient in comparison with class AB and other circuitry solutions. This not only guarantees stable operation with complex loads, fast, clear bass and a large dynamic range, but also provides a lower level of distortion, the absence of porridge, a sluggish attack or blurring of the fronts, and most importantly, the amplifier’s ability to equally cope with completely diverse music.
High-quality amplifier with a timbral block in class D on the chip TPA3116D2 from the American company Texas Instruments.
The advantages of this amplifier:
- the ability to adjust the tonal balance to specific acoustics to taste;
- low consumption at rest;
- high efficiency, the ability to work with a standard heat sink;
- the ability to work with low voltage power supplies;
- ease of connection and installation in any design;
- small dimensions and weight of the entire board assembly.
Supply voltage 12-24V with a current of at least 4A
The board is equipped with a radiator.
This TPA3116D2 amplifier with timbre block can be recommended for:
- amateur radio designs with high output sound signal power (including self-powered);
- a laboratory amplifier for tuning and repairing sound reproducing equipment;
- alterations of passive speakers into active ones.
High-quality amplifier with a timbral block in class D on the chip TPA3116D2 from the American company Texas Instruments.
The advantages of this amplifier:
- the ability to adjust the tonal balance to specific acoustics to taste;
- low consumption at rest;
- high efficiency, the ability to work with a standard heat sink;
- the ability to work with low voltage power supplies;
- ease of connection and installation in any design;
- small dimensions and weight of the entire board assembly.
Supply voltage 12-24V with a current of at least 4A
The board is equipped with a radiator.
This TPA3116D2 amplifier with timbre block can be recommended for:
- amateur radio designs with high output sound signal power (including self-powered);
- a laboratory amplifier for tuning and repairing sound reproducing equipment;
- alterations of passive speakers into active ones.
General characteristics | |
Amplifier class | D |
Built-in protection | From polarity reversal |
Chip | TPA3116D2 |
Load resistance | 4/6/8 Ohm |
Number of channels | stereo |
Power at 4 Ohm | 50 W |
Size | 96х33mm |
Supply voltage maximum (constant) DC | 24V |
Supply voltage minimum (constant) DC | 12V |
THD | 0,1%/25W/4 Ohm |
Amplifier with tone control D-class, TPA3116D2, 2x50W
- Brands CHINA
- Product Code: ADM577-01
- Availability: Is expected
-
290.00грн.