TDA7294, amplifier testing. Characteristics Measurement

TDA7294 amplifier

Testing device TDA7294 amplifier
Sampling mode 24-bit, 48 kHz
Interface E-MU1616m
Testing chain E-MU1616m>TDA7294 amplifier>E-MU1616m
Supply voltage bipolar -30V...0...+30V
Load resistance 4 Ohm
Testing power 20W
Maximum power 100W
   
   
20 Hz - 20 kHz filter ON
Normalize amplitude ON
Level change -0.4 dB / -0.4 dB
Mono mode ON
Calibration singal, Hz 1000
Polarity correct/correct



Summary

Frequency response (from 40 Hz to 15 kHz), dB
+0.04, -0.25
Very good
Noise level, dB (A)
-108.8
Excellent
Dynamic range, dB (A)
108.7
Excellent
THD, %
0.00722
Very good
THD + Noise, dB (A)
-80.5
Good
IMD + Noise, %
0.00764
Excellent
IMD at 10 kHz, %
0.013
Very good
General performance
 
Very good



Frequency response

Spectrum graph

 
Left
Right
From 20 Hz to 20 kHz, dB
-0.55, +0.04
-0.55, +0.04
From 40 Hz to 15 kHz, dB
-0.25, +0.04
-0.25, +0.04



Noise level

Spectrum graph

 
Left
Right
RMS power, dB
-108.4
-108.4
RMS power (A-weighted), dB
-108.8
-108.8
Peak level, dB FS
-92.3
-92.3
DC offset, %
-0.0
-0.0



Dynamic range

Spectrum graph

 
Left
Right
Dynamic range, dB
+108.2
+108.2
Dynamic range (A-weighted), dB
+108.7
+108.7
DC offset, %
+0.00
-0.00



THD + Noise (at -3 dB FS)

Spectrum graph

 
Left
Right
THD, %
0.00722
0.00722
THD + Noise, %
0.00727
0.00727
THD + Noise (A-weighted), %
0.00945
0.00945



Intermodulation distortion

Spectrum graph

 
Left
Right
IMD + Noise, %
0.00764
0.00764
IMD + Noise (A-weighted), %
0.00734
0.00734



IMD (swept tones)

Spectrum graph

 
Left
Right
IMD + Noise at 5000 Hz,
0.01787
0.01787
IMD + Noise at 10000 Hz,
0.00970
0.00970
IMD + Noise at 15000 Hz,
0.01268
0.01268



Conclusions

  Tested by time and by the ears of a huge number of music lovers, the amplifier on the TDA7294 continues to delight sound quality and power. The actual noise level does not exceed -108dB, which is an excellent result.

Summary: Perhaps one of the best microcircuit amplifiers in class AB. You can buy the module from our store kit-amp.com. It is recommended to use this amplifier in building a high-quality audio path. both with shelf and floor acoustics. Further, objective, improving the quality of the "amplifying" part sound path, will necessarily entail material costs by an order of magnitude, or even several orders of magnitude higher




Related Products

TDA7294 original mono amplifier 100W

TDA7294 original mono amplifier 100W

The AMP on TDA7294 is a class AB power amplifier. One of the main features of this microcircuit is the use of field-effect transistors in the preliminary and output amplification stages.The TDA7294 mi..

810.00грн.

Related Articles

TDA7294 inverting amplifier, measurements

TDA7294 inverting amplifier, measurements

Testing device TDA7294 inverting amplifier Sampling mode 24-bit, 48 kHz Interface E-MU1616m Testing chain E-MU1616m>TDA7294 inverting amplifier>E-MU1616m ..

LM3886 amplifier, measurements

LM3886 amplifier, measurements

Testing device LM3886 amplifier Sampling mode 24-bit, 48 kHz Interface E-MU1616m Testing chain E-MU1616m>LM3886 mono amplifier>E-MU1616m Supply voltag..

Write a review

Note: HTML is not translated!
    Bad           Good