The housing of the tube amplifier on 6P3S and 6N2P (STYLISH).
The panel for installing lamps provides for the installation of octal output lamps and 6N2P lamps in the driver stage. If you wish, you can install octal lamps there by drilling holes up to 27mm.
The front panel has no holes, on the rear panel there is only one hole - under the power connector.
Application: housing for a tube amplifier, tube amplifier, do-it-yourself tube amplifier housing, chassis for a tube amplifier, push-pull tube amplifier, 6P3S tube amplifier.
The panel for installing lamps provides for the installation of octal output lamps and 6N2P lamps in the driver stage. If you wish, you can install octal lamps there by drilling holes up to 27mm.
The front panel has no holes, on the rear panel there is only one hole - under the power connector.
Application: housing for a tube amplifier, tube amplifier, do-it-yourself tube amplifier housing, chassis for a tube amplifier, push-pull tube amplifier, 6P3S tube amplifier.
| Dimensions | |
| Width, mm | 400 |
| Depth, mm | 344 |
| Height, mm | 66 |
| Width (cap), mm | 390 |
| Depth (cap), mm | 150 |
| Height (cap), mm | 110 |
| General characteristics | |
| Chassis | steel 1,0mm |
| Colour | black moire (RAL 9005) |
| Design Features | fully collapsible design |
| Material | steel |
| Transformer Cap | steel 1,0 mm |
| Under the radio tubes | ЕСС83 (6Н2П); EL34 (6П3С) |
| Ventilation | with ventilation |
| Weight, kg | 5.1 |
Amplifier housing MB-6p3cSACU (Black) W400-H66-L344
- Brands MiBOX
- Product Code: MB6P3CSAB0-132-02
- Availability: Out of production
-
0.00грн.