The most powerful charger currently on the market! Charging current 120A!

Voltage regulation within 5-15V and current 0-120A make the charger universal. It can even be a charge-starter!

Thick copper cables and brass crocodiles confidently withstand the load.

The charger is made on the basis of a super-powerful, server power supply.

Simple rules of use:

1. Plug the charger into the outlet without turning on the load. Set the voltage using the "metal handle". Unplug from the outlet.

2. Connect the load (crocodiles to the battery), plug the charger into the outlet.

3. Set the current using the "plastic" handle.

Safety rules for the device:

1. Do not short the "crocodiles" together.

2. Do not touch the crocodiles to the charger body.

3. Do not disconnect the crocodiles during charging - first power from the outlet.

4. Observe the polarity.

5. Do not adjust the voltage during charging - only with the crocodiles disconnected.

Violation of the above rules will lead to failure of the charger.

Tips for preserving the device:

1. If you disconnect the crocodiles, then the issue of "reversal of polarity" is only a matter of time. To prevent this - disconnect only ONE crocodile.

2. Reduce the charging power if the mains voltage drops sharply or fluctuates.

Solder to copper terminals m8 + 200 UAH

220V power cable is not included.