Miniature Class D Amplifier on a PAM8610 Chip by American Power Analog Microelectronics
The PAM8610 chip has 40 pins and is made in the QFN package. The amplifier has a small heat dissipation, small size and affordable cost. Low distortion coefficient allows you to get high quality sound with sufficient output power. If there is noise when connecting, you must connect the volume control. The maximum output power of the amplifier is up to 15 W with a load of 4 Ohms, and the power of 10 W with a load of 8 Ohms.
The advantages of this amplifier:
- small sizes;
- low consumption at rest;
- high efficiency;
- the ability to work with low voltage power supplies;
- ease of connection and installation in any design;
- small dimensions and weight of the entire board assembly.
Supply voltage 7-15V with a current of at least 1A
This PAM8610 amplifier can be recommended for:
- amateur radio designs with high output sound signal power (including self-powered);
- a laboratory amplifier for tuning and repairing sound reproducing equipment;
- alterations of passive speakers into active ones.
The PAM8610 chip has 40 pins and is made in the QFN package. The amplifier has a small heat dissipation, small size and affordable cost. Low distortion coefficient allows you to get high quality sound with sufficient output power. If there is noise when connecting, you must connect the volume control. The maximum output power of the amplifier is up to 15 W with a load of 4 Ohms, and the power of 10 W with a load of 8 Ohms.
The advantages of this amplifier:
- small sizes;
- low consumption at rest;
- high efficiency;
- the ability to work with low voltage power supplies;
- ease of connection and installation in any design;
- small dimensions and weight of the entire board assembly.
Supply voltage 7-15V with a current of at least 1A
This PAM8610 amplifier can be recommended for:
- amateur radio designs with high output sound signal power (including self-powered);
- a laboratory amplifier for tuning and repairing sound reproducing equipment;
- alterations of passive speakers into active ones.
General characteristics | |
Amplifier class | D |
Built-in protection | From overheating |
Chip | PAM8610 |
Load resistance | 4/6/8 Ohm |
Number of channels | stereo |
Power at 8 Ohm | 10 W |
Size | 30х25mm |
Supply voltage maximum (constant) DC | 15V |
Supply voltage minimum (constant) DC | 7V |
THD | 0,1%/5W/8 Ohm |
Amplifier D-class, PAM8610, 2x10W
- Brands CHINA
- Product Code: AD8610-01
- Availability: Is expected
-
40.00грн.